RockSolid Performance Logo

616.696.8114



2075 17 Mile Road NE
Cedar Springs, Michigan 49319
Hours: M-F 7:00 a.m. - 5:00 p.m.
Sat 8:00 a.m. - 2:00 p.m.

prodserv_jk_steering_brace.php Include

Jeep JK Steering Shaft Brace & Track Bar

Our RockSolid Performance heavy-duty steering box brace for the 2007-2011 Jeep JK is specifically designed to practically Dana 60 Drive Flange Kit eliminate sector shaft play in the steering box, which is a contributory cause to wandering and inferior road feel. The brace also adds an additional fixture point for the steering box to the frame, reducing stress on the steering box bolts and frame where it is mounted. No drilling, welding, or addition fabrication is required due to the utilization of stock mounting holes.

Our Steering Shaft Brace is paired with our RockSolid Performance Jeep JK Heavy-Duty Adjustable Front Track Bar, which is fully adjustable from 0-7" of lift. Jeep JK Adjustable Front Track Bar The design features 1.375" diameter DOM tubing, 0.1625" wall thickness, a 3/4" Heim joint on the frame end, and a custom CNC high-misalignment bushing on the axle end. For use on 2007-up Jeep Wrangler JKs.


All required mounting hardware is included.

There are three (3) different versions of our Steering Box Brace:

  1. Original (Part # RSP-SBB-JK-V2.1)
    Select this version when you have NO aftermarket frame-side bracketry. NOTE: Due to clearance constraints, this option is packaged with our RockSolid Performance Jeep JK Heavy-Duty Adjustable Front Track Bar. This steering shaft brace is not compatible with stock JK track bars. $260

  2. Track Bar Frame Brace with NO Drop Bracket (Part # RSP-SBB-JK-V4.0)
    Select this version if you have a frame-side track bar brace with NO drop/relocation bracket (e.g. - Poly Performance). NOTE: Due to clearance constraints, this option is packaged with our RockSolid Performance Jeep JK Heavy-Duty Adjustable Front Track Bar. This steering shaft brace is not compatible with stock JK track bars. $260

  3. Track Bar Drop Bracket at the Frame (Part # RSP-SBB-JK-V3.0)
    Select this version if you have a suspension lift that includes a track bar drop mounted at the frame, rather than a raised mount at the axle. This version mounts inside the OEM track bar bracket, replacing the crush sleeve that typically comes with your lift's drop bar. NOTE: Your stock JK track bar will work with this bracket option. $160

Contact Us to place an order today. Track Bar is also available separately for $160.